Maintaining A Perfect Swimming Pool Water Level Through Rainy Season
So it is raining… Great for farmers, or for getting your low swimming pool water level topped up. However, did you know if your pool’s water level gets too high, it can stop your skimmer box from working altogether? Yes, rain has a drawback for pool owners. But the good news about this water level issue, is that the fix is simple.
This Kreepy Krauly Pool Professor post shares practical advice about how to keep your pool’s skimmer box in peak working form, and how to keep your swimming pool in tip-top shape throughout the rainiest Australian rainy seasons.
4 Tips To Keeping A Safe Swimming Pool Water Level
Efficient operation of your pool filter system relies heavily on the water level in your swimming pool, but this fact is often overlooked.
Novice pool owners may not realise it, but if you fail to maintain the ideal swimming pool water level, your skimmer box could be at risk of shutting down.
1. Find Your Pool’s Ideal Level
We already have you covered with the best robotic pool cleaner around. But we also have essential pool tips for you too. And a swimming pool water level is one to know all about. Finding the perfect water level is a simple process and can typically be judged from sight alone. You should aim to have your water sitting at the halfway point of your skimmer hatch (which sits on the side of your pool).
It is recommended you have your swimming pool water level between one-third and one-half up the pool skimmer box opening. If the level is higher than that, it may slow or even stop debris from being pulled into the skimmer box through the plate or valve. This means that there will be floating debris left on your pool water surface as a result.
A pool skimmer box water level getting a bit too high.
2. Avoid A Low Pool Water Level At All Costs
Whether your swimming pool water level falls too low or goes beyond the correct depth, immediate action must be taken.
Is your pool’s water level too low?
Is your swimming pool water level dropping? If it sinks below its optimal depth, you could face severe skimmer box damage. Due to the lack of water, your skimmer will start to draw air into the filter system. As a result, the motor for your pump is at risk of burning out.
Replacing your pool filtration system can be a costly issue, so it’s a good idea to do everything you can to prevent your pool’s water level to dip down this low.
3. High Water Levels Cause Problems (not as dangerous)
Though not as serious as a low swimming pool water level, a high-water level can still pose a mild threat to your skimmer.
Is your pool’s water level too high?
The higher influx of water can reduce the skimmer’s efficiency, which creates a greater likelihood for maintenance work. A non-functioning skimmer also spells doom for the cleanliness of your pool. When the pool filter is out of action, it’s up to you to manually fish out the debris and foliage from the water.
4. Keeping Safe Pool Water Levels Year-Round
Between rain and evaporation, your swimming pool water level will never stay the same. The minute changes caused by outside forces are usually out of your hands, but what can you do to prevent extreme water-level changes? It all comes down to simply keeping an eye on it and knowing what to do based on what you see.
Daily Checks
By simply checking your water level on a daily basis you can stay one step ahead of the changing tides of backyard pools.
Adding and Removing Water
You’ll rarely have to remove water from a swimming pool, but you may need to top it up from time-to-time.
The effects of a low water level are much more disastrous than that of a high one so keeping your water filled is a vital step in pool upkeep.
Just by using these two methods, you can greatly reduce the risk of a dangerous rise or drop in water level, saving you money and unnecessary headaches.
- Safety Tip: We highly recommend you make sure your skimmer box complies with Australian national regulation.
How Heavy Rains Effect Your Pool
When preparing for hurricanes and heavy downpours, many pool owners make the common mistake of draining their pool – something that often has severe consequences.
Your main concern should be your swimming pool’s water level, and you should prepare the space around your pool to accommodate an overflow.
By removing any garden furniture and disconnecting any electrics, you can drastically reduce the risk posed by rising water levels.
- Related Information: Learn more about pool care after storms (dust, rain, wind).
Summary: A Pool’s Skimmer Box Water Level Matters
There is endless advice available but when it comes to your swimming pool water level, the solution is simple. Maintain proper pool care and keep up with regular checks for your water levels to remain stable.
It is acceptable for your water level to be anywhere from one third to one half of your skimmer box height. If it is to sink below, or rise above this range, then you should return the water to its optimum level.
Looking for a robotic pool cleaner to automate your pool bottom cleanliness? We are known to have the best pool cleaner options in the industry! Shop Kreepy Krauly pool vacuum cleaners today!
We’re a homegrown Australian pool cleaner company that takes pride in our Kreepy Kraulies!
NEXT UP: Does your pool cleaner get stuck? Learn how to unstick it!
